Liquid Controls Meters

Positive Displacement Meters
Turbine Meters
Mag Meters
Mass Meters

Products > Bulk Liquid Handling Equipment

Positive Displacement Meters

Positive Displacement Meter

• Sizes: 1 ½" through 6"
• Flow Rates: 5 gpm through 1,000 gpm
• End Connections: ANSI Flanged, NPT, Slip Weld
• Pressure Ratings:
  • Cast Case: 150 & 350 PSI non shock working pressure
  • Two Case Steel Case: 150/150, 150/275, 300/300, 300/720 PSI; 600/1440 ANSI non shock working pressure
• Materials of Construction:
  • Meter Body: Aluminum, Cast Iron, Brass, Steel, Stainless Steel
  • Seal Materials: Buna "N"; Viton; Teflon
• Accuracy: +/- 0.125% over 5:1 range; +/- 0.22% over 10:1 range
• Repeatability: 0.05% of reading over entire range

Turbine Meters

Turbine Meter

• Sizes: ¼" through 12"
• Flow Rates: 0.25 - 12,000 gpm
• End Connections: ANSI, NPT (¼ to 2"), Tri Clover, Flare Tube, Wafer
• Pressure Ratings: 150 - 2,500 ANSI
• Materials of Construction:
  • Body: 304,316,316L SS; Rotor: 17-4 pH SS
  • Bearing: Metal Ball, Carbide Sleeve, Cryo Ball, Fluorosint Sleeve
• Accuracy: +/- 0.25% of ratio over 10:1 range
• Repeatability: 0.05% of reading over entire range

Mag Meters

Mag Meter

• Sizes: 1/8" through 80"
• Flow Rates: 0.005 through 500,000 gpm
• End Connections: ANSI Flanged, Wafer, Threaded, Tri - Clover (sanitary)
• Pressure Ratings: 150 - 350 PSI
• Materials of Construction:
  • Housing: Carbon Steel - 305 SS
  • Electrodes: 316 SS - Hastelloy B, C & Titanium
  • Liner: PTFE (Teflon), Ebonite, EPDM & Polypropylene
• Accuracy: +/- 0.2% of rate over 10:1 range for flow velocity between 6 to 33 feet per second
• Repeatability: 0.1% of full scale
• Certifications: HMS 2400 Series models 3-A certified.

Mass Meters

Mass Meter

• Sizes: ¼" through 10"
• Flow Rates: 0.004 lbs/min to 50,000 lbs/min
• End Connections: ANSI Flanged, Threaded, Sanitary
• Pressure Ratings: 150 - 2,500 ANSI
• Materials of Construction: 316 Ti Stainless Steel (Hastelloy and Tantalum available on request)
• Accuracy: +/- 0.2% of rate over 20:1 range
• Repeatability: 0.1% of flow rate